Mackie SRM210 V-Class Owner's Manual page 20

Unlocking – In order to unlock the loudspeaker,
simply press the speaker control knob and you
will be routed directly to the lock screen in
the control access section. Here you will need
to re-enter the 4-digit code and push the speaker
control knob to unlock.
Secret Squirrel Unlock – If you – or worse, someone
else! – set up a 4-digit lock code and you don't know
the passcode, there is a quick fix. Simply press
and hold down the speaker control knob down
for a few seconds and it will automatically unlock.
Del, of course, deletes the previous selected number
in case you made an oopsie. Speaking of oopsies, forget
George Orwell, right?! We should have gone with Prince
(1999) or Rush (2112) instead! Del is available whether
locking or unlocking.
Illuminating and selecting the left-facing arrow
returns you to the previous screen.
BT Settings – This is where the Bluetooth
configuration settings (auto-connect, auto-link) live.
CONFIGURATION
CH1 IN
CH2 IN
FRONT LED
LED COLOR
LCD SCREEN
LOCK...
BT SETTINGS...
ABOUT/RES...
This is similar to what you will see after first entering
the BT settings screen.
BT CONFIGURATION
AUTO-CONN
AUTO-LINK
Auto Conn – Allows a previously paired device
to auto reconnect if both the device and speaker
are powered on and in range. When illuminated,
push the speaker control knob to select between
on or off.
Auto Link BT – Allows two previously paired speakers
to automatically re-link if both are powered on
and in range. When illuminated, push the speaker
control knob to select between primary, secondary
or off.
20
SRM | V-Class High-Performance Powered Loudspeaker Series
LINE MIC
LINE HI-Z
ON OFF SIG
GRN WH MUL
HI DIM OFF
ON OFF
SEC PRI OFF
For obvious reasons, you cannot have two primary –
or two secondary, for that matter – loudspeakers.
Once a selection is made on one loudspeaker, the
other loudspeaker will default to the other choice.
A Bluetooth-paired device may be
connected to a primary or secondary
loudspeaker. That said, we suggest
pairing to the primary loudspeaker.
Illuminating and selecting the left-facing arrow
returns you to the previous screen.
About/Res... – This displays the current information
about your loudspeaker.
CONFIGURATION
CH1 IN
CH2 IN
FRONT LED
LED COLOR
LCD SCREEN
LOCK...
BT SETTINGS...
ABOUT/RES...
There are really only two reasons to ever go here:
(1) If you've been instructed to do so by Technical
Support; have this information handy!
(2) If you need to do a factory reset
on the loudspeaker.
This is similar to what you will see after first entering
the About/Res settings screen.
ABOUT / RESET
Model :
FW :
DSP :
BT :
TEMP :
FACTORY RESET...
The first two items display the loudspeaker's
firmware and DSP versions and the third is
the temperature of the loudspeaker. None of these
are editable, but they could come in handy if you
need to talk to someone in Technical Support.
LINE MIC
LINE HI-Z
ON OFF SIG
GRN WH MUL
HI DIM OFF
SRM210
1.0.172
1.1.1.600
1.35
30.4 C / 86.8 F