Lippert Components SOLIDSTEP 2.0 Master Owner's Manual page 8

2.
To retract the inner leg:
D. Remove the quick release clevis pin from the outer and inner legs.
E.
Retract the inner leg.
F. Reinstall the quick release clevis pin into the outer leg slot and into the closest inner leg hole that
intersects with the outer leg's slot.
G. The step assembly is shown in the upright stored position, as viewed from underneath the step
assembly in figure 3.
Rev: 11.08.19
Moving parts can pinch, crush or cut. Keep clear and use caution.
Fig. 3
Transport Lock
Page 8
CCD-0001573-11