Removal - Lippert Components SOLIDSTEP 2.0 Master Owner's Manual

2. Lean the top of the Victory Step towards the garage storage brackets then lower until both step
latches click into place around the clevis pins (Fig. 8B) on the garage storage brackets.
3.
Make sure both step latches are secure around the clevis pins (Fig. 10) and both feet are on the floor.

Removal

To remove the Victory Step, push the step latches levers forward (Fig. 11A) then pull the step away evenly from
the clevis pins.
Rev: 11.08.19
Fig.10
Fig. 11
A
Page 17
CCD-0001573-11