Kioti CK25 Owner's Manual page 85

DOUBLE ACTING LEVER
(1) Double Acting Lever 1
(2) Double Acting Lever 2
(A) A PORT (C)C PORT
(B) B PORT (D)D PORT
Pressure
Port
In
A
Lever1
B Out
In
C
Lever2
Out
D
Port A, B, C, D
Move the lever up or down and hold.
This will raise or lower the implement.
Lever will return to neutral when
released.
IMPORTANT
Do not hold the lever in the
"pull" or "push" position once
the remote cylinder has reached
the end of the stroke, as this will
cause oil to flow through the re-
lief valve. Forcing oil through
the relief valve for extended
704O708C
periods will overheat the oil.
Your local KIOTI Dealer can sup-
ply parts to adapt couplers to hy-
draulic hoses.
Returning
Push Pull
Out
In
Out
In
Coupler Size
PT 1/2"
CONNECTING
1. Clean both couplers.
2. Remove dust plugs.
3. Insert the implement coupler to the
4. Pull the implement coupler slightly
DISCONNECTING
1. Clean the couplers.
2. Relieve pressure by moving hydrau-
NOTE
3. Clean oil and dust from the coupler,
HYDRAULIC UNIT
! ! ! ! !
CAUTION
To avoid personal injury:
Stop the engine and relieve
pressure before connecting or
disconnecting lines.
Do not use your hand to check
for leaks.
tractor hydraulic coupler.
to make sure couplers are firmly
connected.
lic control levers with engine shut off.
Pull the hose straight from the hy-
draulic coupler to release it.
then replace the dust plugs.
7
-5