Meaning Of The Status Led Colors; Types Of Authorization; Charging A Vehicle; Connecting Charging Cable - Wallbe MAX Instruction Manual

Instruction manual
Figure 2: Overview of wallbe® MAX
E
Window for checking the counter reading
On both sides per charging point.
F
Type 2 sockets with status LED
On both sides per charging point.
G
Lighting
On both sides per charging point

4 MEANING OF THE STATUS LED COLORS

The charging station has a status LED that displays the
current status of the charging station. The colours of
the status LED represent the following states:
LED shines green,
the charging station is ready for use.
LED flashes alternately green and blue,
authorization and release phase.
LED shines blue,
the vehicle is being charged. You can find
out how far the charging process has pro-
gressed from the charging indicator of your
vehicle.
LED shines red,
the charging station has detected an error.
Driving eMobility

5 TYPES OF AUTHORIZATION

You can use three different types of authorization at
the charging station:
E
F
G
RFID

6 CHARGING A VEHICLE

6.1 Connecting charging cable

!
connected to the charging station and the vehicle, does
not block any paths.
!
ing on the ground when the charging cable is connec-
ted to the charging station. There is a risk of tripping.
Your charging station has either a type 2 socket or a
firmly attached charging cable.
1. Make sure that the status LED of the charging point
you want to use shines green.
2. Connect the charging cable to the inlet of the electric
vehicle.
3. Connect the other end of the charging cable to the
selected socket of the charging station.
Via NFC
By RFID chip or RFID card
Via app
WARNING: Ensure that the charging cable, when
WARNING: Pay attention to the charging cable ly-
5/19