Instruction manual TABLE OF CONTENTS 1 General information....................................3 1.1 Introduction........................................3 1.2 Intended use......................................3 2 Safety........................................3 2.1 Signal words......................................3 2.2 Safety instructions....................................3 3 Description of the charging station..............................4 4 Charging a vehicle....................................4 4.1 Meaning of the status LED colors..............................4 4.2 Connecting charging cable..................................4 4.3 Authorization &...
• Never put your fingers in the socket of the charging to be improper and is not permitted. station. The charging station wallbe® Pro Plus is suitable for • Do not step on the charging cable or bend it all electric vehicles with a type 2 connection. The char- ging station wallbe®...
• Never clean the charging station with harsh cleaning agents, high pressure water jet cleaners and steam Figure 1: Overview of wallbe® Pro Plus Online M2M jet cleaners. Status LEDs • Never immerse the charging cable in in water or any Type 2 sockets other liquid.
1. Make sure that the status LED of the charging point you want to use shines green You can use the wallbe® app or the app of another bil- ling service provider (e.g. plugsurfing) where you are 2. Connect the charging cable to the inlet of the electric registered.
3. Then plug the charging plug into the parking position. tion may only be carried out by the manufacturer or by specialist partners certified by wallbe®. 4.4.2 Ending the charging process via app As a result of the inspection you will receive a protocol, Charging station with socket: which you should keep in a safe place.
4.3). Authorization with The RFID card is not Use a registered Each wallbe® charging station is shipped with a war- the RFID card is registered for the RFID card or contact ranty card in duplicate, one for the operator and one for not possible.
• maintenance protocols, 2. It is at the discretion of wallbe® whether the war- • the original invoice or the sales receipt issued by the ranty is fulfilled by repair or by replacement of the dealer, or any other corresponding confirmation, device or the defective part.
Dimensions 56 x 56 x 22 cm wallbox (H x W x D) For safety reasons, the charging station may only be dismantled by a qualified electrician or a wallbe® spe- Weight approx. 18,5 kg wallbox cialist partner. Ask your contact person whether he will Storage temperature -30 to +70°C...
Page 10
Instruction manual POWER CLASS 22 kW Construction type wallbox or charging column Number of charging points Charging capacity 32 A, 400 V, 3-phase Dimensions 56 x 56 x 22 cm wallbox (H x W x D) Weight approx. 18,5 kg wallbox Storage temperature -30 to +70°C...
Instruction manual 12 DIRECTIVES AND STANDARDS Circuit breaker The following guidelines and standards have been ob- Circuit breakers disconnect the circuit from the mains served: if the current exceeds a certain value due to overload or short-circuit. Directives Lock release function •...
Page 12
This document may not be copied in whole or in part or reproduced in any form Paderborner Straße 76 or form without the written permission of wallbe GmbH. All illustrations in this 33189 Schlangen manual are only examples and may differ from the delivered product. All infor- Tel.: +49 (0) 5252 98892-00...