Related Manuals for Wallbe Pro
Summary of Contents for Wallbe Pro
- Page 1 Driving eMobility wallbe Charging station ® Wallbox & charging column INSTALLATION MANUAL 100232-f 05/2020...
-
Page 2: Table Of Contents
4.1 Conditions for the electrical connection............................7 4.2 Electrical connection of the wall charging station..........................8 4.3 Electrical connection of the charging column..........................8 5 Safety tests........................................8 6 Technical Data of wallbe Pro online M2M............................9 7 Technical Data of wallbe Pro offline...............................11 Driving eMobility 2/18... -
Page 3: General Information
Pay par- improper and is not permitted. ticular attention to DIN VDE 0100-722 and DIN VDE The charging station wallbe® Pro is suitable for all 0105-100. electric vehicles with a type 2 connection. The charging •... -
Page 4: Assembly
Installation manual 3 ASSEMBLY come into contact with heat sources, dirt or water. • Never put your fingers in the socket of the charging 3.1 Choice of location station. • Do not install the charging station near flammable or • Do not step on the charging cable or bend it. explosive materials. -
Page 5: Mounting Of The Charging Column
5. Place the housing on the mounting brackets of the wall mounting plate. 6. Open the full metal housing of the wallbe Pro. On the bottom of the housing you will find 8 mm holes in the four corners for fastening the full metal housing. -
Page 6: Casting Of An Own Foundation Without Foundation Plate
Installation manual For the use of the prefabricated foundation proceed as follows: 1. For the prefabricated foundation, dig a excavation pit with a minimum area of 100 x 80 cm and a minimum depth of 60 cm. 2. Make a compacted gravel bed. 3. -
Page 7: Electrical Connection
• All versions of the wallbe Pro require a suitable cir- cuit breaker and residual current circuit breaker. Terminal assignment X1 for supply cable, cable cross sections and fuse protection • All variants of the wallbe Pro require a suitable re- sidual current circuit breaker. -
Page 8: Electrical Connection Of The Wall Charging Station
4. Connect the supply cable according to the power class (see chapter 4.1). If no foundation plate is integrated in the foundation, pro- ceed as follows: 1. Pull the supply cables through the legs of the char- ging column. -
Page 9: Technical Data Of Wallbe Pro Online M2M
Installation manual 6 TECHNICAL DATA OF WALLBE PRO ONLINE Protection class State according to EN State D with ventilation is not sup- 61851-1 ported. POWER CLASS 11 kW Rated voltage U 230 V / 400 V AC Construction type Wallbox or charging column... - Page 10 Installation manual POWER CLASS 22 kW State according to EN State D with ventilation is not sup- 61851-1 ported. Construction type Wallbox or charging column Rated voltage U 230 V / 400 V AC Number of charging points Rated operational voltage 220/380 - 240/415 V 3N Charging capacity 32 A, 230 V, 3-phase...
-
Page 11: Technical Data Of Wallbe Pro Offline
Installation manual 7 TECHNICAL DATA OF WALLBE PRO OFFLINE Protection class State according to EN State D with ventilation is not sup- POWER CLASS 3,7 kW 61851-1 ported. Construction type Wallbox or charging column Rated voltage U 230 V / 400 V AC... - Page 12 Installation manual POWER CLASS 4,6 kW State according to EN State D with ventilation is not sup- 61851-1 ported. Construction type Wallbox or charging column Rated voltage U 230 V / 400 V AC Number of charging points Rated operational voltage 220/380 - 240/415 V 3N Charging capacity 20 A, 230 V, 1-phase...
- Page 13 Installation manual POWER CLASS 7,4 kW State according to EN State D with ventilation is not sup- 61851-1 ported. Construction type Wallbox or charging column Rated voltage U 230 V / 400 V AC Number of charging points Rated operational voltage 220/380 - 240/415 V 3N Charging capacity 32 A, 230 V, 1-phase...
- Page 14 Installation manual POWER CLASS 11 kW State according to EN State D with ventilation is not sup- 61851-1 ported. Construction type Wallbox or charging column Rated voltage U 230 V / 400 V AC Number of charging points Rated operational voltage 220/380 - 240/415 V 3N Charging capacity 16 A, 230 V, 3-phase...
- Page 15 Installation manual POWER CLASS 22 kW State according to EN State D with ventilation is not sup- 61851-1 ported. Construction type Wallbox or charging column Rated voltage U 230 V / 400 V AC Number of charging points Rated operational voltage 220/380 - 240/415 V 3N Charging capacity 32 A, 230 V, 3-phase...
- Page 16 This document may not be copied in whole or in part or reproduced in any form Paderborner Straße 76 or form without the written permission of wallbe GmbH. All illustrations in this 33189 Schlangen manual are only examples and may differ from the delivered product. All infor- Tel.: +49 (0) 5252 98892-00...