Wallbe Max Only With Nfc - Wallbe MAX Instruction Manual

Instruction manual
4. When the desired state of charge has been reached,
you can stop the charging process by opening the
central locking of your vehicle or end the charging
process via app. The following message is then di-
splayed:
Note: When the vehicle is fully charged, the vehicle
will automatically stop charging.
Note: In case of power failure, the charging plug is
automatically unlocked by the lock release module.
5. Disconnect the charging cable from the electric ve-
hicle. To do this, follow the instructions of your ve-
hicle's instruction manual.
6. Then disconnect the charging cable from the char-
ging station.
7. Stow the charging cable carefully back in your vehic-
le.

6.3 wallbe MAX only with NFC

1. When the charging station is connected to the ve-
hicle, the display then shows the prompt „SELECT
YOUR CONNECTED CHARGING POINT". Follow the
instruction by tapping on the corresponding symbol.
Driving eMobility
2. Afterwards, an information regarding the certificate
of compliance with german calibration law appears.
Tap on the „Confirm" field.
3. Then hold your credit card in front of the NFC reader.
4. The charging station is then activated. The status
LED flashes alternately green and blue. The follo-
wing image appears on the display:
9/19