Wallbe Max With Nfc, Rfid And App; Starting And Ending The Charging Process With Nfc - Wallbe MAX Instruction Manual

Instruction manual

6.2 wallbe MAX with NFC, RFID and app

1. When the charging station is connected to the ve-
hicle, the display then shows the prompt „SELECT
YOUR CONNECTED CHARGING POINT". Follow the
instruction by tapping on the corresponding symbol:
2. Then select your payment method.

6.2.1 Starting and ending the charging process with NFC

1. When you have selected NFC as payment method,
an information regarding the certificate of complian-
ce with german calibration law appears afterwards.
Tap on the „Confirm" field.
2. Then hold your credit card in front of the NFC reader.
Follow afterwards the instructions on the payment
terminal.
Driving eMobility
3. The charging station is then activated. The status
LED flashes alternately green and blue. The follo-
wing image appears on the display:
When the authorization was successfull, the follo-
wing message is displayed:
The charging process starts then automatically. The
status LED now shines blue. During the charging
process, the display shows the current charging po-
wer, the charging current and the charging time for
your selected charging point:
6/19