Wi-Fi - Reolink C2 User Manual

4.3.8 Wi-Fi

You can configure the Wi-Fi settings and connect your camera to a wireless network on
this page.

SSID: Wireless Network Name, it displays the wireless network name you are
connected or intend to connect.

Password: Input the Wi-Fi password of SSID you choose.

Show Password: Click to show the password.
How to connect to a wireless network:
1. Click the Scan button, it will show all the SSIDs and the Wi-Fi Signal Strength.
2. Double click on the Wi-Fi network you want to Join, the SSID will show in the SSID
field.
3. Enter the Wi-Fi password of the SSID you choose. Click Show Password to
display the password you entered, then double check whether it is correct.
4. Click on Wi-Fi Test to test if the Wi-Fi Setting is a success. If Wi-Fi Test succeeds,
click Save to save the settings.
If Wi-Fi Test Failed, please check:
a) If the password is correct.
b) If the antenna on Wi-Fi camera are connected properly.
c) If the Wi-Fi router works properly.
Note:
1. For initial Wi-Fi setup,
After setting up successfully, you can remove the cable and use the camera via Wi-Fi
connection.
2. When changing the settings, they should always be made first in the camera and then
you need to connect camera to router with an Ethernet cable.
27