Ntp - Reolink C2 User Manual

4.3.7 NTP

NTP: Network Time Protocol. If you've got the camera connected to the Internet, you can
have it automatically sync time with an online server.

Domain or IP: The server or IP you intend to use to access the current date and time.
The default server is pool.ntp.org. Other server options are:

Automatically: Enable or disable auto-synchronization regularly.

Port: The port that the NTP server uses.

Time Interval: Set the Sync interval time.
Click Synchronize to synchronize the time now, click Save to save and enable settings.
Note:
1. If you have enabled NTP - set this to the time zone where you are.
2. Some NTP servers are NOT fully compatible with DST (Daylight Savings Time). This
may cause your system to double-count adding one or removing one more hour than
they should, or cancel each other out. You may need to change your time zone to
adjust accordingly or simply not use NTP and DST simultaneously.
26