Others Setting; Device Setting > Alarm - Reolink C2 User Manual

in the router. This ensures that the camera is always accessible when making changes.

4.3.9 Others Setting


Media Port: Camera will use this port to login to the Reolink client App. The default
value is 9000 and you can change it.

HTTP Port: Used to login to the web interface of the camera by a web browser. The
default value is 80 and you can change it.

RTMP Port: Used to send the streaming file when you visit the camera vie Web, the
default value is 1935 and you can change it.

RTSP Port: Used to send the streaming file to Realplayer, the default value is 554 and
you can change it.

Onvif Port: used to add the camera to third party Onvif client software. The default
value is 8000 and you can change it.

Use P2P: Enable or disable UID. If you uncheck it, you will not be able to access the
camera remotely.

Use UPNP: Enable or disable UPNP.

UID: UID code of the camera is read-only. The 16-alphanumerical unique identification
code for each camera, used to access the camera remotely.

The QR code: It records the info of UID, you can scan it with your phone to access
the camera.
4.4 Device Setting > Alarm
The camera will detect motion when there is a change in the picture. Check the Enable
box to enable motion detection. You can set up the Sensitivity, Area on this page.
28