System > Dst; System > Maintenance - Reolink C2 User Manual


PAL: used in Western Europe and Australia.

NTSC: used in the US, Canada and Japan.

Time Zone: Choose the time zone where you are.

Date Format: the format of the date you want the camera to show.

Time Format: Choose time format from 12-hour or 24-hour format.

Date: the current time of the camera. It could be edited manually.

Device Name: Shows the name of your camera. You can modify the name here.

Enable Password: Enable or disable the password to log in the camera.

Synchronize Local Time: Click to synchronize the camera time with local PC time.
Click Save to save and enable settings.
4.6.3 System > DST
DST Settings: Turn on and set up DST if DST is applied in your area.
How to configure DST Settings
1. Check Use DST to enable DST Settings.
2. Choose the Offset time (1 hour or 2 hours ahead) according to the DST policy in your
area.
3. Type in the Start time and End time when DST started or ended in your area.
4.6.4 System > Maintenance
On this page, you can set the camera to reboot itself automatically at a certain time, reset
33