Device Settings > Network; Network Status - Reolink C2 User Manual


Resolution: Choose the resolution for the selected stream type.

Frame Rate (fps): Choose the frame rate for the selected stream type.

Maximum Bitrate (kbps): Choose the bitrate for the selected stream type. The higher
the bitrate is, the better quality the recording will be, and the more space each
recording will take up on the hard disk.

H.264 Profile: set the H.264 profile to be Baseline, Main or High.
Note:

Both the main-stream and the sub-stream are always operating - in fact, the sub-
stream forms part of the main-stream. The options will affect the output quality of each
stream, but won't change which one is being used in different circumstances.

To enable audio in live view or recording, make sure Audio is checked.
4.3 Device Settings > Network
Under Network, there are sub menus, you may check and configure the network
parameters of the camera.

4.3.1 Network Status

On this page, you can check network status. They are IP Address, Mask, Gateway
Address, Mac Address, DNS1, DNS2.
18