Device Settings > Network - Reolink C2 User Manual

➢ Motion​ : SD card will start to record when motion is detected during this time.
➢ None​ : SD card will not record even when motion is detected during this time.
Note​ :
● This option will only be available when SD card has been inserted.
● SD card can only store Motion Detection alarm, it doesn't support continuous
recording.
4.3 Device Settings > Network
Under Network, there are 4 sub menus including ​ G eneral​ , ​ A dvanced​ , ​ S tatus
and ​ W i-Fi Settings​ , you may check and configure the network parameters of the
camera.
4.3.1 Network > General
On this page, you can configure the network parameters of the camera and
check the MAC address.
26