Advertisement
e
Screw
<N2>
Base Plate Ass'y
IO Case Ass'y
b
Screw
<N2>
Screw
<N2>
a
d
4-10
*Notice
1. After finishing Cable Cover Ass'y assembly
operation, hold both sides so that Base Plate Ass'y
and IO Case Ass'y do not come off, and then rotate
the product in front and back direction
(See the illustration on the left).
Then, place it on the special jig.
2.
Tighten IO Case Ass'y to Base Plate Ass'y with
Screws<N2>.
Use the above special jig.
c
Tightening order of Screws<N2>: a - b - c - d - e
Torque of tightening screw :
Screws<N2> = 0.8 ± 0.08N·m ( 8.0 ± 0.8kgf·cm)
Advertisement
