Advertisement
4.1.5.
Attaching the IO Case Ass'y
1. Attach the IO Case Ass'y to the Base Plate Ass'y and fix with 5 Screws <N2>. No.1 to No.5.
Screws <N2>:DRSB3+6FKL
■ Attaching the IO Case Ass'y.
S1:
S2:
S4:
S5:
S1:Insulation S2:Pinching Cables
CAUTION
S3:Sharp Edge S4:Check Parts NO. S5:Others
*Notice
1. Pass Docking PCB Ass'y to the
square hole of Base Plate Ass'y.
Be careful so the coating surface
is not damaged.
2. Connect Cable<E2> to IO Case
Ass'y IO PCB assy.
Pull out Cable<E2> from the cutout
of IO Case Ass'y.
See fig. 1.
3. Match the stand of Base Plate Ass'y to
the hole of IO Case Ass'y and attach.
Use the special jig.
4. Turn over the set after assembling.
Use the special jig.
<N2>
:No.2
<N2>
:No.5
Base Plate Ass'y
IO Case Ass'y
S3:
Cable<E2>
S2
S2
Cable<E2>
IO Case Ass'y
fig.1
<N2>
:No.1
<N2>
:No.4
<N2>
:No.3
Release
Paper
4-9
IO Case Ass'y
Base
Plate Ass'y
Docking PCB Ass'y
Advertisement
