Advertisement
4.1.3.
Attaching the Back Cover
1. Attach the Back Cover to the Back Plate Ass'y and fix with 2 Screws <N2>. No.1 to No.2.
Screws <N2>:DRSB3+6FKL
■ Back Cover preparation.
*Notice
1. Remove the Release Paper of Back Cover Cushion
and attach it to the concave in the center of Back Cover.
For horizontal direction, match to the end with the gap
of 0~0.5 mm.
For the vertical direction, match Back Cover Cushion to
the bottom end of Back Cover with the gap of 0~0.5 mm.
Face the poron side (double side) of Back Cover Cushion
downward.
<N2>
:No.2
Back Cover
Back Plate Ass'y
Back Cover
Cushion
4-5
<N2>
:No.1
Attaching Standard
for horizontal direction
Bottom of poron
Back Cover
Attaching Standard
for vertical direction
Advertisement
