Advertisement
4.1.4.
Attaching the Main PCB and assembling the IO Cas'y Ass'y
1. Attach the DC IN CN Cover to the IO Case and fix with 1 Screw <N2>. No.1.
2. Attach the PCB Sheet to the Main PCB, set it in the IO Case and fix with 6 Screws <N5>. No.2 to No.7.
3. Attach the DC IN Plate and USB Plate to the Main PCB and fix with 6 Screws <N4>. No.8 to No.13.
4. Fix with 2 screws <N2>. No.14 to No.15.
5. Attach the DC-IN-CN-Cover to the Cable<E6>, Washer<E6> and fix with 2 Nut<E6>. No.16.
Nut <E6>:DFJS876XA
Screws <N2>:DRSB3+6FKL
Screws <N4>:DXYN3+J7FNL
Screws <N5>:IKT0104AA
■ IO Cover preparation
*Notice
1. Tighten DC IN CN Cover to IO Case with Screw<N2>.
2.
3. Set PCB Sheet on IO Case.
Torque of tightening screw :
Screw<N2> = 0.8 ± 0.08N·m (
DC IN CN Cover
DC IN CN Cover
<N4>
<N4>
:No.10
:No.8
<N4>
:No.12
DC IN Plate
Main PCB
PCB Sheet
IO Case
DC IN
CN Cover
<N2>
:No.1
Nut
<E6>
:No.16
± 0.8kgf·cm)
Screw<N2>
<N4>
:No.11
USB Plate
<N5>
<N5>
:No.7
:No.3
<N5>
:No.4
<N5>
<N5>
:No.6
:No.5
<N5>
:No.2
:No.13
Cable
<E6>
Washer
<E6>
PCB Sheet
PCB Sheet
4-7
<N4>
<N4>
:No.9
<N2>
:No.14
<N2>
:No.15
IO Case
Advertisement
