■ Base Plate Ass'y preparation.
*Notice
1. Remove the Release Paper of CN Cover Screw Sheet
and attach it to Base Plate Ass'y.
When attaching, make sure CN Cover Screw Sheet
does not run over the bar ring of Base Plate Ass'y.
Set A in the B direction.
2. For attaching direction, see the illustration on the left.
No attaching order.
*Notice
1. Remove the Release Paper of Base Guide Spacer
and attach it to Base Plate Ass'y.
Use the special jig.
2. No attaching order.
Base Plate Ass'y
Base Guide Spacer
CN Cover Screw Sheet
A
B
4-2
Base Plate Ass'y