Advertisement
*Notice
1. Remove the Wave Washer and Nut B from the
Lock Unit Ass'y, set the Key Cam Plate, fix the
Wave Washer and Nut B<K61> again.
Use the special jig.
2. Set the Nut B<K61> to the Key Cam Plate and
tighten with the Key Lock Cover.
Torque of tightening screw :
Nut B<K61> = 2.0 ± 0.2N·m ( 20 ± 2kgf·cm)
Screw<N2> = 0.8 ± 0.08N·m ( 8 ± 0.8kgf·cm)
■ Attaching the Lock Unit.
*Notice
1. Tighten Lock Unit Ass'y to Base Plate Ass'y with Screws<N2>.
Use the special jig.
Tightening order of Screws<N2>: a - b
Torque of tightening screw :
Screws<N2> = 0.8 ± 0.08N·m ( 8.0 ± 0.8kgf·cm)
Screw<N2>
Base Plate Ass'y
4-4
Lock Unit Ass'y
Key Lock Cover
Key Cam Plate
Key Stopper
Wave Washer
a
b
Lock Unit Ass'y
Screw<N2>
Nut B<K61>
Advertisement
