Advertisement
Step 4
You will need
4 x Cam Bolts
Phillips head
(H3)
screwdriver
Attach 4 x Cam Bolts (H3) into Top Panel (P1) using a Phillips head screwdriver.
Step 5
You will need
4 x Dowels
4 x Cam Nuts
(H1)
(H4)
Flat head
screwdriver
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert Back Panel (P5) into the groove of Side Panels (P2, P3) and Bottom Panel (P4).
Insert 4 x Dowels (H1) into Side Panels (P2, P3).
Insert 4 x Cam Nuts (H4) into the holes of Side Panels (P2) and (P3).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P1) and tighten the cam nuts.
www.fantasticfurniture.com.au
H3
H3
(P5)
H1
H1
(P2)
H3
H3
(P1)
(P1)
H1
H4
H4
(P3)
PAGE 6
Advertisement
