Advertisement
Step 3
You will need
1 x Dowel
6 x Cam Nuts
(H1)
(H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Rails (P5,P6,P7,P8) to Left Side Panel (P2) with 1 x Dowel (H1), and secure with 6 x Cam
Nuts (H4). Tighten with a Phillips Head Screwdriver.
Step 4
Slide remaining Back Panels (P9) into the grooves of Rails (P5,P8).
fantasticfurniture.com.au
(P6)
(P5)
(P6)
(P7)
(P5)
(P8)
(P7)
H4
H1
(P2)
(P9)
(P8)
H4
(P5)
PAGE 6
Advertisement
