Summary of Contents for fantastic furniture Baxter
Page 1
Version 1.0 Baxter Egg Chair 1 Seater fantasticfurniture.com.au...
Page 2
Look like you’ve found your Fantastic! We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Care Tips for Powder Coated Products Following the general care instructions below will help extend the life of your product and keep them looking their best! high-pressure as this may damage the product.
Page 3
Assembly checklist R ead through the instructions carefully Ma ke sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten screws Identify and lay out all of the components before you begin assembly .
Page 4
What you need to assemble the product 1 x Upper Half Basket (P1) 1 x Lower Half Basket (P2) 1 x Cushion (P5) 1 x Connector (P3) 1 x Small Cushion (P6) 1 x Support Leg (P4) Parts list Upper Half Basket (P1); Lower Half Basket (P2);...
Page 5
Step 1 You will need (H4) 5 x Adjusting Feet (H4) Attach 5 x Adjusting Feet (H4) to 1 x Support Leg (P4). Adjust the length of the feet by turning clockwise or anti-clockwise according to the ground. Step 2 ou will need (H5) (H1)
Page 6
Step 3 (H5) Y ou will need (H1) (H3) Allen Key 4 x Short Bolts (H1) (H5) 4 x Metal Washers (H3) With assistance, attach Connector (P3) to Lower Half Basket (P2) using 4 x Short Bolts (H1) and 4 x Metal Washers (H3), tighten with Allen Key (H5). Step 4 Y ou will need 4 x Long Bolts (H2)
Page 7
Step 6 Place Cushion (P5) on the Small Cushion (P6). Fully tighten all Short and Long Bolts (H1, H2) on Egg Chair ensuring it remains stable. With assistance, carefully move the Baxter Swivel Egg to it's desired spot. fantasticfurniture.com.au Page 7...
Page 8
Step 7 IMPORTANT: Fully tighten all bolts on chair. Periodically check to ensure all bolts remain tight. Job Complete! In the interest of our environment please dispose of all packaging thoughtfully. fantasticfurniture.com.au Page 8...
Need help?
Do you have a question about the Baxter and is the answer not in the manual?
Questions and answers