Step 11
You will need
25 x Cam Bolts
Phillips Head
(H3)
Screwdriver
Attach 5 x Cam Bolts (H3) to Drawer Fronts (P12) as shown.
Tighten with a Phillips Head Screwdriver.
Step 12
You will need
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Drawer Sides (P13, P14) and Rail (P15) to Drawer Front (P12).
Insert 5 x Cam Nuts (H4) into the holes of Drawer Sides (P13, P14, P15).
Make sure the opening on cam nuts point towards the incoming cam bolts.
Tighten with a Phillips head screwdriver.
fantasticfurniture.com.au
(P12)
(P13)
(P12)
H3
(P15)
x 5
x 5
(P14)
H4
H4
PAGE 10