Page 1
BLOC DESK WITH STORAGE SHELVES • • • FLOOR AREA ffff 1.5 HR 2.5M X2.0M REQUIRED ASSEMBLY SPACE APPROXIMATE ASSEMBLY TIME 2 PERSON ASSEMBLY REQUIRED ASSEMBLY TOOLS EB� � � EB 8 POZI SCREWDRIVER HAMMER MEASURING TAPE DRILL ASSEMBLED DIMENSIONS ..
Page 2
BLOC DESK WITH STORAGE SHELVES Tips before you start: Please check that all parts are present before you start the assembly of your furniture. For ease and speed of assembly, we recommend that before you commence each step of the assembly, that you identify all the parts required for that step.
Page 3
BLOC DESK WITH STORAGE SHELVES Tips before you start: QUICKFIT Tighten quickfit until shoulder is flush with panel. Do not overtighten or undertighten. CAM LOCK WRONG CORRECT When fitting cam lock, ensure starting position is correct before you insert connecting quickfit.
BLOC DESK WITH STORAGE SHELVES PART LIST: PART NAME PART NAME SIDE/ BACK PANEL (LEFT/ RIGHT) TOP PANEL BOTTOM PANEL SHELF PANEL (TOP) SHELF PANEL (BOTTOM) 4/11...
BLOC DESK WITH STORAGE SHELVES HARDWARE LIST @Xl8 @X12 � � SCREW WOOD DOWEL BOLT-9607 PARALEL CAM-9642 CAM M4.7 X38MM 08X25MM NECK DOWEL 24 X 8.5 3000 l 2/l 3MM �)Xl8 (F)�cm(] ROUND STICKER GLUE (018MM) 5/11...
Page 6
BLOC DESK WITH STORAGE SHELVES STEP 1 Using glue (F) insert dowel (B) into pieces (1, 4 & 5) as shown. STEP2 Take both side panels (1 & 3), using a drill on low speed/ torque or a phillips head screw driver CAM PINS (C) as shown.
Page 7
BLOC DESK WITH STORAGE SHELVES STEP3 Lay panel (1) flat (on a clean dry surface) . Using glue (F) attach with CAM LOCKS (D) panels (4). Attach 18mm round sticker(E) to top of the cam locks as shown. Attach panels (S) using glue.
Page 8
BLOC DESK WITH STORAGE SHELVES STEP4 Lay panel (1) flat (on a clean dry surface) . Using glue (F) attach with CAM LOCKS (D) panels (4). Attach 18mm round sticker(E) to top of the cam locks as shown. Attach panels (S) using glue.
Page 9
BLOC DESK WITH STORAGE SHELVES STEPS Lay panel (1) flat (on a clean dry surface) . Using glue (F) attach with CAM LOCKS (D) panels (4). Attach 18mm round sticker(E) to top of the cam locks as shown. Attach panels (S) using glue.
Page 10
BLOC DESK WITH STORAGE SHELVES STEP6 Attach panel (2) to frame using screw 38mm (A) as shown. 10/11...
Page 11
BLOC DESK WITH STORAGE SHELVES STEP7 Attach top panels (3) to frame using glue (F) and CAM LOCKS (D). Attach 18mm round sticker (E) to top of the cam locks as shown. 11/11...