Using The Timer Programming Feature; Checking A Preset Recording; Cancelling A Preset Recording - Samsung SV-647F Instruction Manual

Using the TIMER Programming Feature

The TIMER Programming feature allows you to preset the VCR to
record a programme up to one month before that programme is to
be broadcast. Up to six programmes can be preset.
Before presetting a recording, check that the date and
time are correct.
1
- Insert the cassette. Press the PROG. button.
Press the
PROG PROG OPTIONS INSTALL
then press the ❿!button or,
Press MENU on the remote control.
CLOCK BONUS LANG
Result:
MINUTERIE
Press the OK button to select
Result:
➛❿!!
OK FIN: MENU
$ ❷!!
2 Press ❿ to select the input source.
3
Select the required station by pressing the
ENTRÉE to select the AV1, AV2 or AUX input sources.
** OPTIONS PROG. **
4 Press ❿ to select the recording day.
NORMALE
5
Select the required day by pressing the
SHOWVIEW
6 Press ❿ to select the recording start time.
7
Select the required hour value by pressing the
❿
FIN: MENU
$ ❷
8 Press ❿ to select the minutes.
9
Select the required minute value by pressing the
10 Press ❿ to select the recording end time.
1/JAN LUN 21:28
PROG
ST JOUR DÉBUT→FIN V/P
11 Select the required recording end time by pressing the
1 LU 1 12:00→12:50 P
STD
buttons, following the same procedure as when selecting the
-- ---- --:--→--:---- -
-- ---- --:--→--:---- -
recording start time.
-- ---- --:--→--:---- -
-- ---- --:--→--:---- -
12 Press ❿ to select the recording speed (AUTO/STD/DBL).
-- ---- --:--→--:---- -
➛❿
$ ❷
13
EFFACE:ANNUL./RàZ MENU Press the
(Standard Play),
14 Press ❿ to select the VPS or PDC(V/P) recording mode.
15
Press the
M.A./VCR M.A./TV
mode (marked
16
When you have finished, press the MENU button.
17
RALENTI
17
Press the M.A./VCR. button to activate the timer.
If you wish to turn the timer off any reason simply press the
M.A./VCR. button again.
SHUTTLE
Preset a programme title
Press OK during the timer programming procedure or in
the timer programming screen.
Press the
To move to the next or previous character, press the
➛ or ❿ buttons respectivly.
If you wish to store the title, press OK.
26
or buttons to select the NORMALE option and
$ ❷
The programming menu is displayed.
MINUTERIE option.
The MINUTERIE menu is displayed.
, buttons or
$ ❷
or buttons.
$ ❷
or buttons.
$ ❷
or buttons.
$ ❷
or
$ ❷
or buttons to switch between the AUTO , STD
$ ❷
(Long Play) recording speeds.
DBL
or buttons to toggle between the VPS or PDC
$ ❷
P ) and the non-VPS/PDC mode (marked - ).
or buttons to select a character.
$ ❷

Checking a Preset Recording

You can check your preset recordings:
When you have finished presetting the VCR
If you have forgotten which programmes will be
recorded
Before the VCR enters the timer standby mode
1 - Insert the cassette. Press the PROG. button.
Press the or buttons to select the NORMALE
$ ❷
then press the ❿!button or,
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the OK button to select MINUTERIE option.
Result: The MINUTERIE menu is displayed.
2
Press the or buttons to select the required programme.
$ ❷
3 Press the ➛ or ❿ buttons to select and change any values as
required. For more details, refer to the previous page.
4
On completion, press MENU.

Cancelling a Preset Recording

You can cancel any programmes that are:
Incorrect
No longer required
1
- Insert the cassette. Press the PROG. button.
Press the or buttons to select the NORMALE
$ ❷
then press the ❿!button or,
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the OK button to select option.
MINUTERIE
Result: The MINUTERIE menu is displayed.
2 Select the programme to be cancelled by pressing the
buttons.
3
Press the ANNUL./RàZ button to cancel the selected programme.
Result: All the recording information is deleted and the broad-
cast will not be recorded.
4 On completion, press MENU.
Before starting recording, the VCR compares the timer
duration with the remaining time on the cassette.
Auto Tape Speed Select
The VCR's "Auto Tape Speed Select" function compares
the duration of the timer recording to the actual recording
time remaining on the tape loaded. If there is insufficient
tape to complete a timer recording in AUTO mode, the
VCR automatically switches to LP mode to record the
whole programme.
E.g. If there is a one hour Timer Recording in AUTO
mode to be started, and only 40 minutes tape
remaining, the VCR will record in SP for 20
minutes and switch to complete the remaining 40
minutes in LP mode.
1/JAN LUN 21:28
PROG
option and
ST JOUR DÉBUT→FIN V/P
1 LU 1 12:00→12:50 P
STD
-- ---- --:--→--:---- -
-- ---- --:--→--:---- -
-- ---- --:--→--:---- -
-- ---- --:--→--:---- -
-- ---- --:--→--:---- -
❿
RÉGLER:
$ ❷
EFFACE:ANNUL./RàZ MENU
1/JAN LUN 21:28
PROG
ST JOUR DÉBUT→FIN V/P
1 LU 1 12:00→12:50 P
STD
-- ---- --:--→--:---- -
-- ---- --:--→--:---- -
option and
-- ---- --:--→--:---- -
-- ---- --:--→--:---- -
-- ---- --:--→--:---- -
❿
RÉGLER:
$ ❷
EFFACE:ANNUL./RàZ MENU
or
$ ❷
ANNUL./RàZ IM/IM INDEX
-/--
SELECT.
3
TV VCR ENTRÉE
RÉPÉT.
AUDIO AFFICH./
27
GB