Using The Showview Feature (Sv-645X/Sv-445G/Sv-245G) - Samsung SV-645X Instruction Manual

Using the ShowView Feature (SV-645X/SV-445G/SV-245G Only)
Before presetting your VCR:
Switch on both the television and your VCR
Check that the date and time are correct
Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1 Press the TIMER button.
Result: The TIMER METHOD is displayed.
2 Press the corresponding or buttons, until the
" ❷
option is selected.
3 Press the ❿!button to select
SHOWVIEW .
Result: A message is displayed to allow you to enter the
ShowView code.
If all six programmes have been set, the message
IS FULL is displayed. Refer to page 30 if you wish to
cancel a preset recording.
4 Press the numeric buttons to enter the code opposite the pro-
gramme that you wish to record in your television magazine.
If you wish to correct the ShowView code that you are
entering:
Press the ➛ button until the digit to be corrected is
cleared
Enter the correct digit
5
Press the MENU button.
Result: The information concerning the programme is displayed.
When using the ShowView function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the or buttons. Refer to the following page if:
" ❷
The programme number or times flash
You wish to modify the programme
6 If the programme and times are correct, press the MENU button.
7
Press the VCR STANDBY/ON (STANDBY/ON) button to activate
the timer. V
Result: The Record indicator ( ) is displayed.
If no cassette has been inserted when you press
STANDBY/ON the Record indicator ( ) flashes. If the
safety tab on the cassette has been broken, the cassette is
ejected. Insert the appropriate cassette.
8 Refer to page 30 if you wish to:
Check that your VCR has been programmed correctly
Cancel a preset recording
The numbers next to each TV programme listing are
ShowView code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the ShowView code for the programme
you wish to record.
™ ShowView is a trademark of Gemstar Development Corporation. The ShowView system is
manufactured under licence from Gemstar Development Corporation.
** TIMER METHOD **
STANDARD
SHOWVIEW
❿
END: MENU
" ❷
SHOWVIEW
SHOWVIEW
CODE ---------
TIMER ➛
CODE:0-9 CORRECT:
END:MENU
(SV-645X)
1/JAN MON 21:28
PROG
PR DAY START STOP V/P
1 MO 1 12:00 12:50SP ON
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
➛❿
" ❷
DELETE:CLR/RST MENU
(SV-445G)
1/JAN MON 21:28
PROG
PR DAY START STOP
1 MO 1 12:00 12:50SP
-- ---- --:-- --:----
-- ---- --:-- --:----
+
IPC -- ---- --:-- --:----
-- ---- --:-- --:----
-- ---- --:-- --:----
➛❿
" ❷
NICAM +
V IPC
DELETE:CLR/RST MENU
NICAM
(SV-245G)
1/JAN MON 21:28
PROG
PR DAY START STOP
1 MO 1 12:00 12:50
-- ---- --:-- --:--
-- ---- --:-- --:--
-- ---- --:-- --:--
-- ---- --:-- --:--
-- ---- --:-- --:--
➛❿
" ❷
DELETE:CLR/RST MENU
27
GB