Deciding How To Connect Your Vcr; Connecting Your Vcr To The Tv Using The Coaxial Cable And Scart Cable - Samsung SV-647F Instruction Manual

Deciding How to Connect Your VCR

You must take into account various factors when connecting audio or video systems:
Types of connectors available on your systems
Systems connected permanently to the VCR (satellite receiver for example) or temporarily
(camcorder for example)
Your VCR is equipped with the following connectors.
Connector Location Type Direction
AV1 Rear SCART In/Out
AV1 (EURO AV)
AV2 Rear SCART In/Out
AV2 (DEC./EXT.)
AUX Front Audio/Video RCA
VIDEO L - AUDIO - R
AUX
Audio output Rear Audio RCA
OUT/SORTIE
R/D
AUDIO
L/G
75 Ω
OUT TO TV Rear
coaxial
TV
75 Ω
IN FROM ANT. Rear
coaxial
Whenever you connect an audio or video system to your VCR, ensure that all elements are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.

Connecting Your VCR to the TV using the Coaxial Cable and SCART cable

8
Recommended Use
Television
Satellite receiver
Other VCR
Decoder for scrambled Pay TV
broadcasts
Example: CANAL+.
Satellite receiver
Other VCR
In Audio Hi-Fi system
Camcorder
Hi-Fi Stereo VCR
Out Audio Hi-Fi system
Out Television
In Aerial
Cable television network
Satellite receiver
Connecting Your VCR to the TV using the Coaxial
Cable and SCART cable
To receive television programmes a signal must be received from
one of the following sources:
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Make sure that both the television and the VCR are
switched off before connecting the cables.
1 Remove the aerial or network input cable from the television.
2
Connect this cable to the 75Ω coaxial socket marked
rear of your VCR.
3 Plug the coaxial cable supplied into the socket on your VCR.
TV
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5 Connect one end of the scart cable to the AV1 (EURO AV) socket
on the rear of the VCR. You must connect your VCR to the
television via the scart cable.
6
Plug the other end into the appropriate connector on the
television.
AV2 (DEC./EXT.)
OUT/SORTIE
R/D
TV
2
AUDIO
L/G
AV1 (EURO AV)
on the
TV
AV2 (DEC./EXT.)
OUT/SORTIE
R/D
TV
AUDIO
L/G
AV1 (EURO AV)
3
4
OUT/SORTIE
R/D
TV
AUDIO
L/G
AV1 (EURO AV)
5
9
GB