Table of Contents
Advertisement
Connecting an RCA Audio/Video Input Cable
You can connect other audio/video equipment to your VCR using
audio/video cables if the appropriate outputs are available on the
EJECT
equipment chosen.
MARCHE/MINUT.
Examples:
VIDEO
L - AUDIO - R
AUX
1
MARCHE/MINUT.
1
Connect one end of the RCA audio/video cable into the VIDEO
socket on the front of the VCR.
VIDEO
L - AUDIO - R
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
AUX
3
3
3
Connect one end of the RCA audio cable into the AUDIO sockets
on the front of the VCR.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
44
You wish to copy a video cassette with the help of a
second VCR (see page 45).
You wish to play back and/or copy pictures taken
with a camcorder (see page 45).
Make sure that both the television and the VCR are
switched off before connecting the cables.
Take care to respect the colour coding of the left and right
channels.
Using the Assemble Edit Function
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
1
Insert the cassette to be edited in your VCR.
❿ II
2
Press the
button to start playback.
3
When you reach the position from which you wish to start the new
❿ II
recording, press the
button.
IM/IM
4
Press the IM/IM (
) button as often as necessary to advance
frame by frame, until the exact recording position is located.
5
While the VCR is in still mode, press the ENRG. button to activate
the Assemble Edit function.
6
Select the source from which you wish to record by pressing:
The ST./AJUST. ($ or ❷) buttons for television channels
The ENTRÉE button for the AV1, AV2 or AUX input sources
❿ II
7
Press the
button to start recording.
8
When you have finished recording, press
.
Recording from Another VCR or Camcorder
You can copy a cassette to your VCR from another video source,
such as another VCR or a camcorder.
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1
Connect the VCR, from which the cassette is to be copied, to the
appropriate SCART audio and video input connectors on the rear
of your VCR.
You can also use a RCA audio and video cable to connect the
AUX input on the front of your VCR.
2
Insert a blank cassette in your VCR.
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4
Press the ENTRÉE button to select the appropriate input on your
VCR:
AV1 or AV2 for the SCART input
AUX for the RCA input
5
Start playing back the cassette to be copied.
6
Press the ENRG. button to start recording on your VCR.
7
When you have finished recording, press
on both VCRs.
GB
2
ENRG.
MENU
OK
EJECT
MARCHE/MINUT.
STOP
STATIONS
ENRG. II P/IMAGE
VIDEO
L - AUDIO - R
AUX
ENRG.
MENU
6
OK
45
Advertisement
Table of Contents
