Connecting A Decoder For Scrambled Pay Tv Broadcasts; Connecting Your Vcr To The Satellite Receiver Or Other Equipment; Connecting The Audio Output Cable - Samsung SV-647F Instruction Manual

Connecting a Decoder for scrambled PAY TV broadcasts

This VCR is fully equipped to receive scrambled Pay TV broadcasts.
Example:
You can:
Record a scrambled programme while watching another
channel
Record another channel while watching a scrambled
programme
1 Connect the VCR to the television as indicated on page 9.
2
Plug the SCART cable with the decoder into the AV2 (DEC./EXT.)
socket on the rear of the VCR.
3
Plug the other end into the decoder.
Aerial
TV
Aerial Connector
AV2 (DEC./EXT.)
TV
AV1 (EURO AV)
SCART Cable

Connecting the Audio Output Cable

You can connect your VCR to a Hi-Fi system.
Example: You wish to take advantage of the quality of your Hi-Fi
stereo system when watching a programme or recording
AV2 (DEC./EXT.) via your VCR.
OUT/SORTIE
R/D
TV
AUDIO
L/G
AV1 (EURO AV)
1
1
Connect the coaxial cable or SCART as indicated on page 9.
AV2 (DEC./EXT.)
2
2
Plug the audio output cable into the audio connectors on the rear
OUT/SORTIE of your VCR.
R/D
AUDIO
L/G
AV1 (EURO AV)
3
Plug the other end of the audio cable into the appropriate input
2
connectors on your Hi-Fi stereo system.
10
CANAL+ or Premiere broadcasts.
DECODER
AV1 (EURO AV)
3
SCART Cable
OUT/SORTIE 2
R/D
AUDIO
L/G
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen
when the VCR is switched off.
Make sure that both the television and the VCR are
switched off before connecting the cables.
Respect the colour coding of the left and right channels.
Connecting Your VCR to the Satellite receiver or Other
Equipment
You can connect your VCR to the Satellite receiver or other VCR using the SCART cable if the appropriate
outputs are available on the equipment chosen. The following illustrations give a few examples of the
connection possibilities.
1. AV2(DEC./EXT.): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV2(DEC./EXT.) socket on the rear of
the VCR.
After making this connection, select the source by pressing the INPUT button for the AV2 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
Satellite Receiver or other Equipment
Aerial Connector
AV1 (EURO AV)
TV
1
AV2 (DEC./EXT.)
TV
AV1 (EURO AV)
SCART Cable
If you connect the DVD player into the AV2(DEC./EXT.) socket on the rear of the VCR, you have
to select normal video output in the video display menu of DVD player.
Aerial
2
SCART Cable
OUT/SORTIE
R/D
AUDIO
L/G
11
GB