Wenger Tablet Mount Assembly Instructions

For ipad accessory for flex techbridge

Assembly Instructions

Tablet Mount for iPad

Accessory

for Flex

TechBridge

©Wenger Corporation 2014

Printed in USA 09/14

Part #236A188-02

Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: 800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.com

Table of Contents

Need help?

Do you have a question about the Tablet Mount and is the answer not in the manual?

Page 1 Assembly Instructions Tablet Mount for iPad Accessory ® for Flex TechBridge ® ©Wenger Corporation 2014 Printed in USA 09/14 Part #236A188-02 Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448 Questions? Call..USA: 800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.com...
Page 2 ARTS Item Qty Description Item Qty Description Tablet Mount for iPad Button Head Socket Screw, 3/8-16 x 3/4 Flex Arm Carriage Bolt, 3/8-16 x 1-1/4 TechBridge Mounting Bracket Divider Wing Nut, 3/8-16 Nyloc Locking Wing Nut, Zinc Plated, 3/8-16 Lock Washer, 3/8 ID...
Page 3 SSEMBLY 1. Assemble the Tablet Mount for iPad as shown. a. Attach the Tablet Mount to the Post-End of the Flex Arm using two 3/8 ID Flat Washers and a 3/8-16 Zinc Plated Nyloc Locking Wing Nut. Securely tighten the Wing Nut using a Pliers.
Page 4 Slide the two holes in the Mounting Bracket onto the Carriage Bolts. c. Secure the Tablet Mount Assembly to the Bridge Extrusion using two 3/8-16 Divider Wing Nuts. Bridge...