Wenger ADA COMPLIANT DISABILITY RAMP Installation Instructions

Wenger ADA COMPLIANT DISABILITY RAMP Installation Instructions

Connecting stagetek ada ramp to trouper staging

Advertisement

For Replacement Parts and more detailed product information,
refer to the original ADA Ramp Assembly Instructions 282A301
CAUTION
!
Make sure anyone assembling or
installing these components has read
and understands the instructions.
Visit the Staging & Platforms web page at wengercorp.com for detailed instructions and videos.
Note: Please read and understand these instructions before installing.
Note: If you need additional information, contact Wenger Corporation using the information below.
©Wenger Corporation 2022
Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448
Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com
Connecting StageTek
Basic Instructions only!
or Trouper Owner's Manual 176A700.
CAUTION
!
Always comply with Warnings
or Cautions in the instructions
or posted on the equipment.
Printed in USA 2022-08
Installation Instructions
ADA Ramp
®
to Trouper
Staging
®
Part #282A338-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADA COMPLIANT DISABILITY RAMP and is the answer not in the manual?

Questions and answers

Keaun Windear
May 29, 2025

need help with the yellow bracket

User image 6838a22feb557
2 comments:
Mr. Anderson
May 29, 2025

The yellow bracket, referred to as the "bridging bracket," is used to connect the StageTek ADA Ramp to the Trouper staging deck. Its purpose is to ensure the ramp surface is flush with the stage, preventing trip hazards and providing a stable connection. It is secured to the underside of the deck using four knobs.

This answer is automatically generated

Keaun
May 30, 2025

@Mr. Anderson My deck doesn’t have any knobs or holes

Subscribe to Our Youtube Channel

Summary of Contents for Wenger ADA COMPLIANT DISABILITY RAMP

  • Page 1 Visit the Staging & Platforms web page at wengercorp.com for detailed instructions and videos. Note: Please read and understand these instructions before installing. Note: If you need additional information, contact Wenger Corporation using the information below. ©Wenger Corporation 2022 Printed in USA 2022-08 Part #282A338-01 Wenger Corporation, 555 Park Drive, P.O.
  • Page 2 1. Attach the bridging bracket to the Trouper staging deck. Be sure that the existing stage is level and that the height is the same as the specified height of the ADA ramp. All railings should already be installed on the existing stage. Be sure that the ramp surfaces are flush to avoid trip hazards.

Table of Contents

Save PDF