Rear Cover Unit - Canon PowerShot G2 Service Manual

CHAPTER 3. REPAIR INSTRUCTION
(1)-1
LCD PANEL
i
(1)-4

2.2.3 REAR COVER UNIT

(1) REAR COVER UNIT
1. Remove the two screws.
2. Remove the STRAP RING UNIT.
3. Open the CF COVER in the direction of arrow.
4. Remove the four screws.
5. Open the LCD PANEL in the direction of arrow.
6. Remove the REAR COVER UNIT.
7. Remove the SELECTOR SPRING.
8. Remove the two screws.
9. Remove the LCD LOCK STOPPER.
CAUTION
Be careful that this part must not be jumped out.
10. Remove the LCD LOCK SPRING and LCD LOCK SLIDER.
11. Remove the BODY NUMBER PLATE from the REAR COVER UNIT.
(1)-2
(1)-1
STRAP RING UNIT
e
d
(1)-5
(1)-6
Be careful
not to drop.
j
(1)-4
i
(1)-4
LCD LOCK
SPRING
LCD LOCK SLIDER
Fig. 3-6 REAR COVER UNIT
CF COVER
(1)-3
(1)-7
SELECTOR SPRING
(1)-10
(1)-9
i
(1)-8
LCD LOCK STOPPER
BODY NUMBER PLATE
3-6
REAR COVER UNIT
(1)-11