Front Cover Unit, Cf Cover, Battery Cover Spring - Canon PowerShot A300 Service Manual

(2)-1
CF COVER
(1)-3
SHUTTER BUTTON
(2)-2
BATTERY COVER
SPRING
(1)-3
FRONT COVER UNIT
MAIN SHILD 2 CASE
(1)-2
BARRIER FPC
(1)-2
Lead wire (Black)
NOTE (Assembling)
Fig. 3-7 FRONT COVER UNIT, CF COVER, BATTERY COVER SPRING

2.5 FRONT COVER UNIT, CF COVER, BATTERY COVER SPRING

(1) FRONT COVER UNIT
1. Remove the lead wire (black) that is connected to the MAIN SHIELD 2 CASE by soldering.
NOTE (Assembling)
After soldering, apply the DIA BOND 1663G.
2. Remove the connector of BARRIER FPC.
3. Remove the FRONT COVER UNIT while taking care not to collide the USB connector with the SHUTTER
BUTTON.
CAUTION
Never touch the terminal of capacitor.
When the FRONT COVER UNIT is removed, be sure to discharge the capacitor.
(2) CF COVER, BATTERY COVER SPRING
1. Remove the CF COVER.
2. Remove the BATTERY COVER SPRING.
(2)-1
(1)-3
(1)-1
3-7
CHAPTER 3. REPAIR INSTRUCTION
CAUTION
ELECT. CAPASITOR
Never touch the terminals of
the capacitor
How to discharge the capacitor
(Discharging resistor:
Around 1k-ohms,
approx. 5 W.)
ELECT. CAPASITOR
(1)-3
USB CONNECTOR
terminal
Orange
Gray
terminal
*1