Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera retailer. Camera Battery Pack NB-13L* Battery Charger Wrist Strap CB-2LHE * Do not peel off the adhesive covering from a battery pack. ●...
Manuals and Software You can download manuals and software from the following URL. http://www.canon.com/icpd/ ● With a computer connected to the Internet, access the above URL. ● Access the site for your country or region. ● Adobe Reader is required to view the manuals.
Page 4
Initial Preparations Charge the battery pack. Plug the power cord into the charger, then plug the other end into a power outlet. The charging lamp turns orange, and charging begins. When charging is fi nished, the lamp turns green.
Page 5
Initial Preparations Check your card’s write-protect ( 1 ) switch and insert the memory card. Recording is not possible on memory cards with a write-protect switch when the switch is in the locked position. Move the switch toward (1). ...
Initial Preparations Specify your home time zone. Press the [ ][ ] buttons to choose your home time zone. Press the [ ] button when fi nished. After a confi rmation message, the setting screen is no longer displayed. ...
Trying the Camera Out Shooting For fully automatic selection of the optimal settings for specifi c scenes, simply let the camera determine the subject and shooting conditions. Turn the camera on and enter ] mode. Press the ON/OFF button. ...
Trying the Camera Out Viewing Enter Playback mode. Press the [ ] button. Choose images. To view the previous or next image, press the [ ][ ] buttons or turn the [ ] dial. Movies are identifi ed by a [ ] icon.
Information subject to change without notice, as are product specifi cations and appearance. ● Illustrations and screenshots in this guide may differ slightly from the actual equipment. ● The above items notwithstanding, Canon cannot be held liable for any loss arising from the use of this product.
Page 10
Graphical symbols placed on the equipment Class II equipment Direct current...