Acc. Shoe - Canon PowerShot G2 Service Manual

CHAPTER 3. REPAIR INSTRUCTION
NOTE (Assembling)
After tightening the screw,
coat the Three bond 1401C.

ACC. SHOE

2.3.1.4 ACC. SHOE
(1) ACC. SHOE, ACC. SHOE SPRING
1. Remove the ACC. SHOE SPRING as shown in the figure.
NOTE (Assembling)
Coat the Dia bond 1663G as shown in the figure.
2. Remove the four screws.
3. Remove the ACC. SHOE.
NOTE (Assembling)
Coat the Three bond 1401C as shown in the figure.
NOTE (Assembling)
Coat it with the Dia bond 1663G.
m
ACC. SHOE SPRING
(1)-2
(1)-1
(1)-3
Fig. 3-26 ACC. SHOE
3-26
Insert a pair of tweezers under the
ACC. SHOE SPRING and remove it.
CAUTION
Be careful not to damage the parts!