Rear Cover Unit - Canon PowerShot G3 Service Manual

EVF UNIT
(1)-1
e
REAR COVER
UNIT
LCD BUSH
When installing the main body and the REAR COVER UNIT do as follows.
NOTE (Assembling)
Install them after each diopter adjustment dial of the FINDER UNIT and the
REAR COVER UNIT are aligned to the angles specified as shown in the
illustration.
.
FINDER UNIT
A
Rotate the diopter adjustment dial in the direction
A
of mark as far as it can go. When it reaches
the deep end, return it slightly.

2.2.2 REAR COVER UNIT

(1) REAR COVER UNIT
1. Remove the three screws of e.
2. Remove the screw of f.
3. Open the CF COVER.
4. Open the EVF UNIT.
5. Remove the REAR COVER UNIT from the main body.
6. Remove the SELECTOR SPRING from REAR COVER UNIT.
CAUTION
Be careful not to drop the SELECTOR SPRING.
NOTE (Assembling)
When installing the main body and the REAR COVER UNIT do as follows. Install them after each
diopter adjustment dial of the FINDER UNIT and the REAR COVER UNIT are aligned to the angles
specified as shown in the illustration.
(1)-2
f
(1)-4
(1)-5
(1)-6
(1)-1
e
Diopter adjustment dial
Fig. 3-5 REAR COVER UNIT
3-5
CHAPTER 3. REPAIR INSTRUCTION
CAUTION
Be careful not to drop the
SELECTOR SPRING.
SELECTOR
SPRING
e
CD1-4853-000
4.0mm
SILVER
M1.7
REAR COVER UNIT
Rotate the diopter adjustment dial
as far as it can go.
CF COVER
(1)-3
f
CD1-4854-000
4.5mm
DARK SILVER
M1.7