Lcd/Hinge Unit; Lcd Top Cover, Hinge Unit - Canon PowerShot G2 Service Manual

CHAPTER 3. REPAIR INSTRUCTION
NOTE (Assembling)
Coat the Dia bond 1663G.

2.3.5 LCD/HINGE UNIT

2.3.5.1 LCD TOP COVER, HINGE UNIT

(1) LCD TOP COVER
1. Rotate the HINGE UNIT by 90 degrees in the direction of the arrow.
2. Remove the four screws.
3. Remove the LCD TOP COVER.
(2) HINGE UNIT
1. Remove the soldering.
NOTE (Assembling)
Coat the Dia bond 1663G as shown in the figure.
2. Remove the screw.
3. Remove the HINGE UNIT in the direction of the arrow.
4. Remove the two connectors.
(2)-1
(2)-3
O
(2)-2
HINGE UNIT
Fig. 3-38 LCD TOP COVER, HINGE UNIT
3-38
(1)-1
HINGE UNIT
Soldering
(2)-4
(1)-3
h
LCD TOP COVER
(1)-2
h
(1)-2