Mode Dial - Canon PowerShot G2 Service Manual

NOTE (Assembling)
Set the MODE DIAL to "M" and then
install the MODE CONNECTIVE PLATE
to the position as shown in the illustration.
NOTE (Assembling)
Coat the sliding surface of the MODE DIAL
and MAIN DIAL with Logenest Lambda A-74.

2.3.1.3 MODE DIAL

(1) MODE CONNECTIVE PLATE, MODE DIAL, MODE CLICK SPRING, MAIN DIAL,
MODE CLICK SPRING
1. Remove the screw.
2. Remove the MODE CONNECTIVE PLATE.
3. Remove the MODE DIAL.
4. Remove the MODE CLICK SPRING.
5. Remove the MAIN DIAL.
NOTE (Assembling)
Coat the sliding surface of the MODE DIAL and MAIN DIAL with Logenest Lambda A-74.
6. Remove the MODE CLICK SPRING.
CHAPTER 3. REPAIR INSTRUCTION
(1)-6
MODE CLICK SPRING
Fig. 3-25 MODE DIAL
3-25
(1)-1
t
(1)-2
MODE CONNECTIVE PLATE
(1)-5
MAIN DIAL
(1)-4
MODE CLICK SPRING
(1)-3
MODE DIAL