Slave Charger; Transfer - TBB Energier Pro Series User Manual

Voltage compensated charging
Through separately installed VS (battery voltage sensor), Energier pro Inverter Charger Combination could automatically adjust its
output compensating the voltage drop on the cable assuring the full charging through delivering the right voltage to battery.
Charger capacity adjustable
Through the clock switch at central panel or through Vision Lite or Rapconfig, the user can choose the capacity of batteries they want
to charge. Depending on the selection, Energier pro Inverter Charger Combination will automatically adjust its output power making it
suitable for the battery capacity selected. The charging current default threshold rate is 15% of the battery capacity (I =0.15C) chosen.
Lithium battery charging
Energier pro Inverter Charger Combination can be configured to charge Lithium battery and charging parameter can be programmed as
well through Vision Lite or Rapconfig.

2.4 Slave Charger

Along with a powerful charger for stationery/service battery, Energier pro Inverter Charger Combination also offers a slave charger which
is a 3-5A floater charger(Only for 12VDC / 24VDC model without CF4080M and CF50100M).For mobile application, it can be used for
on board starter battery charging.

2.5 Transfer

When voltage/frequency/waveform of external AC input matches the minimum quality, the voltage will be switched directly to AC output.
Energier pro Inverter Charger Combination will switch off, battery charger will switch on and any loads connected will be powered by external
AC input. You will have the same voltage on the AC output as AC input.
In case of AC input source failure or exceeding the minimum requirement, Energier pro Inverter Charger Combination will initiate a quick
switching to inverter (about 15ms), of which will guarantee an undisturbed power for the majority of appliances. Once AC input resumes or
matches the quality, the unit will switch back again within 15ms. In this mode, Energier pro Inverter Charger Combination could be used as
an UPS. Energier pro Inverter Charger Combination can also be configured to solar mode (DC priority), please refer to 2.10.
5
Energier pro User Manual