Battery Type; Equalization (Eq) - TBB Energier Pro Series User Manual

4.5 Battery Type

Please select the battery type at the DIP Switch 4-5, following please find the list of available battery type and charging voltage.
DS4 DS5
off off
off on
on on
on off
The default setting was AGM (OFF-OFF).
When dip switch 4 is ON and dip switch 5 is OFF, the battery type can be set as flooded , OPZS or Lead-Carbon.
Flooded is the default setting. The other two can be set by Rapconfig software ("Programmable IO" ->"Dip switch" ->"battery type").
Please update the label on the unit to avoid any mistake after you change the default setting.

4.6 Equalization (EQ)

Through switch dip switch 6 with a cycle from OFF to ON to OFF,you could choose Equalization program for your Flooded、OPzS
battery, of which the charger will, after a normal charging cycle (bulk-absorption), raise the voltage to EQ level with a timer of 30mins
after voltage reaching the EQ voltage level.
Dip
Switch 6
X
X
X
Off-On-Off
Off-On-Off
X
The field 'X'means this program can not be applied on AGM、GEL / OPzV or LFP battery, it only be applied on Flooded、OPzS battery.
As a protection, if you choose wrong battery type,Energier pro Inverter Charger Combination won't delivery equalization charging program
and will only deliver the battery type you chose.
Please refer to chapter 7.12 for details of performing equalization charging.
Battery type
12 VDC
AGM 14.4
GEL / OPzV 14.1
LFP 14.4
Flooded 14.8
OPzS 15.2
Lead-Carbon
14.1
12VDC model
Battery type
AGM N / A
OPzV N / A
LFP N / A
Flooded 16.2
OPzS 16.2
Lead-Carbon N/A
Absorption
24 VDC 48 VDC
28.8 57.6
28.2 56.4
28.8 57.6
29.6 59.2
30.4 60.8
28.2 56.4
24VDC model
EQ EQ
N / A
N / A
N / A
32.4
32.4
N/A
27
Energier pro User Manual
Float
12 VDC 24 VDC 48 VDC
13.5 27 54
13.5 27 54
13.5 27 54
13.5 27 54
13.5 27 54
13.62 27.24 54.48
48VDC model
EQ
N / A
N / A
N / A
64.8
64.8
N/A