How The System Works - Intec FORCE/3 HP2 Instruction Manual

Instruction Manual
| 4

How the System Works

OVERVIEW: Cellulose, Fiberglass, or Stone Wool insulation is loaded into the hopper. The agitator
breaks-up and starts the insulation conditioning process prior to insulation entering the airlock. The
airlock transports the insulation into the airstream created by the blower system. Insulation is
discharged from the airlock, through the machine outlet, and into the hose. The insulation is further
conditioned as it travels through the hose.
An introduction to key components of the system follows:
Control Panel
Hopper
Agitator Motor
Air Inlet Filter
Air Inlet Filter: Filters the blower intake air to prevent foreign particles from entering blower housing
to allow for a longer life blower motor. Clean regularly (i.e. clean prior to each use).
Agitator & Airlock Motor: This energy efficient motor powers both the agitator and airlock.
Hopper: The hopper contains the insulation being fed into the agitators.
T: 303-833-6644 800-666-1611 www.inteccorp.com
or
Original Language - English