Intec FORCE/3 HP2 Instruction Manual page 10

3. Attach 3" hose (100 feet minimum, 150 feet is recommended to provide
for additional insulation conditioning) to machine outlet using a hose
clamp. Note: If you desire to wall fill, you may benefit from Intec's
Machine Insert Tube which converts your machine's outlet to 2"; this is a
recommended procedure when using cellulose (Intec's multi-reducer hose
kit is recommended when using fiberglass). You can now use 2" hose
from your machine's outlet with no need to use various size hoses and
reducing couplers.
4. Slide Gate - Open slide gate & place pin in
5. System Controls
Determine how you will operate the system. Choices are to control the system thru the:
• Control panel
• Wired remote
o Connect the wired remote to the wired remote
receptacle if you decide to utilize the wired remote.
• Wireless remote if you have the GOWIRELESS system
a. Power On system: Press the POWER ON BUTTON to
provide power to the system. Note the following:
i. When the system has power, the POWER ON BUTTON will glow green
T: 303-833-6644
Original Language - English
800-666-1611
or
Instruction Manual
desired opening.
www.inteccorp.com
| 9