Wlan Module - HP Chromebook x360 12b Maintenance And Service Manual

WLAN module

Table 5-3 WLAN module description and spare part number information
Description
Intel 9560 ac 2×2 MU-MIMO + Bluetooth 5.0 M.2 non-vPro CNVi WW with 2 antennas
IMPORTANT:
authorized for use in the computer by the governmental agency that regulates wireless devices in your country
or region. If you replace the module and then receive a warning message, remove the module to restore device
functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the WLAN module.
NOTE:
WLAN antenna cable connects to the WLAN module #2/Aux terminal.
2. Remove the Phillips M2.0×2.9 screw (2) that secures the WLAN module to the keyboard/top cover.
To prevent an unresponsive system, replace the wireless module only with a wireless module
Bottom cover on page
The #1/white WLAN antenna cable connects to the WLAN module #1/Main terminal. The #2/ black
22).
Battery on page 24).
Component replacement procedures
Spare part number
L41693-005
25