Selecting Lock Mode 2 Or - Extron electronics CrossPoint 450 Plus Series Setup Manual

Selecting Lock mode 2 or toggling between
mode 2 and mode 1
NOTES:
Toggle the lock on and off by pressing and holding the
button and the
Press and hold
simultaneously.
VIDEO
2 seconds
VIDEO
The buttons blink twice.
Release the buttons.
Viewing and Adjusting the Audio Level
1. Press and hold the
Press and
Hold
2.
Press an input or output button. Refer to the
CrossPoint 450 Plus / CrossPoint Ultra / MAV Plus Switcher
Manual, chapter 3, "Operation", to read the displayed value.
3.
Increase/decrease the level or volume by pressing the
and
4. Press and release the
12 CrossPoint / MAV Matrix Switchers • Operation
•
If the switcher is in Lock mode 0 or mode 1, this
procedure selects mode 2.
• If the switcher is in Lock mode 2, this procedure selects
mode 1.
button for approximately 2 seconds.
Audio
I / O
AUDIO
I / O
AUDIO
Audio
2 seconds
AUDIO AUDIO
Audio button blinks.
<
( ) buttons.
View
button until it flashes.
button to exit.
Audio
Video
>
( )
Esc