Operation Guide; Record Mode; Record Enable - SHOWTEC SCENE PILOT User Manual

2. Operation Guide
Press and hold down the Record/Mode
button for five seconds, the LED above
it
lights indicating
Record mode is active,
the Segment Display shows the
program
and its scene of last time.
The
DMX LED
will
light
when
DMX signal
is present.
1. Record enable.
2.
Tap
the
Program or
Strobe button to select
chase programs or strobe
programs. The
LED
near
it
lights indicating your selection.
3.
Tap
the UplDown button to select
the program
you
wish to
record scenes
into.
There are total 9 chase
programs and 9 strobe
programs.