SHOWTEC SCENE PILOT User Manual page 7

1.
Overview
1. Power Switch
2.
Segment Display
3. Up Button
4. Down
Button
5. Record/Mode
Button
6.
Strobe Button
7.
Program Button
8.
Black-out Button
Move the slider
to Up position to turn
the
power on.
Shows the current activity or function state.
Tap
the
button
to increase the display value.
Tap the button to decrease the display value.
Keep pressing for five seconds to activate Record
Mode, the LED above it
lights
indicating
this
selection.
Tap
the
button to
select Run mode from Manual/
Audio/Auto
modes.
Tap the button
to activate Strobe programs and the
LED near it lights indicating
your
selection.
Tap the button
to activate Chase
programs and the
LED
near it
lights indicating
your
selection.
Tap
the button to kill output temporarily or
go
back one
level
in Record mode.
Keep pressing for 3 seconds, a tap of Program button
enables to send file dump as well as a tap of Strobe
button enables
to receive file
dump.
9.
Speed
Button
Tap the button
to activate speed setting.
10. Fade+Speed/Del
Button Tap the button
to
activate
fade
speed.
ln Record mode,
this
button
can
be used
to delete
a program or a scene.