Cleaning
Lower section
The lower section is held in the device by two pins at the
sides.
☞ Fold the lower section down.
☞ Press the lower section backwards.
☞ Lift the lower section up approx. 10 mm.
☞ Pull the lower section out forwards.
☞ Clean the lower section with a soft, moist cloth.
☞ Dry the lower section with a soft cloth.
Upper section and bulging edge
The upper section is permanently attached to the device.
The bulging edge is attached and held in the device by
magnets.
26
☞ Pull the bulging edge from the upper section.
☞ Clean the upper section with a soft, moist cloth.
☞ Clean the bulging edge.
☞ Make sure the bulging edge is completely dry.
☞ Dry the upper section with a soft cloth.
Capillar Trap
The Capillar Trap is inserted and is held in the device through
a side lock.
☞ Grasp the Capillar Trap on its sides with both hands.
☞ Pull the Capillar Trap out.
☞ Clean the Capillar Trap e.g. in a dishwasher.
☞ Clean the surfaces and edges on the recess for the
Capillar Trap with a soft, moist cloth.
☞ Make sure that the Capillar Trap is completely dry.
After cleaning, the interior parts should be reinserted.
D "3.5.11 Insert the Capillar Trap, bulging edge and lower
section" (page 19).
6004347_0 – 27.09.2018