Motherboard Features - Supermicro X11SRL-F User Manual

Super X11SRL-F User's Manual

Motherboard Features

CPU
•
Supports an Intel® Xeon® W-2200/2100 series (Socket R4) processor with up to 18 cores and a thermal design power
(TDP) of up to 165W
Memory
•
Up to 512GB of RDIMM and 1TB of LRDIMM DDR4 (288-pin) ECC memory with speeds of up to 2933 MHz in eight
memory slots
Notes:
1. Memory speed support depends on the processors used in the system. DDR4-2933MHz memory speed support
is available with selected Intel Xeon W-2200 series processors.
2. 16Gb density DRAM module is supported by Intel Xeon W-2200 series processors.
DIMM Size
•
Up to 128GB at 1.2V
Note: For the latest CPU/memory updates, please refer to our website at
motherboard.
Chipset
•
Intel PCH C422
Expansion Slots
•
One (1) PCI-E 3.0 x4 (in x8) Slot (PCH SLOT1)
•
Three (3) PCI-E 3.0 x8 Slots (CPU SLOT2/SLOT3/SLOT7)
•
One (1) PCI-E 3.0 x8 (in x16) Slot (CPU SLOT4)
•
One (1) PCI-E 3.0 x16 Slot (CPU SLOT6)
•
One (1) M.2 Socket for PCI-E 3.0 x4 (Supports M-Key 2280 & 22110)
Network
•
Intel Ethernet Controller i210 for Dual 1G BASE-T Ports
•
One (1) Dedicated IPMI LAN located on the rear I/O panel
Baseboard Management Controller (BMC)
•
ASPEED AST2500 BMC
Graphics
•
Graphics controller via ASPEED AST2500 BMC
Note: The table above is continued on the next page.
Motherboard Features
14
http://www.supermicro.com/products/